MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Developer Type 2 Black
Product Number: A1339640
Chemical Name: mixture
CAS Number: 0-00-0
5 Dedrick Place
West Caldwell, NJ 07006 USA
1-973-882-2000 or 1-973-882-5218 (For product information)
1-800-336-6737 (For emergencies)
Aficio 400, 401, 500.
2. COMPOSITION/INFORMATION ON INGREDIENTS
> 95.0 %
< 3.0 %
< 3.0 %
< 1.0 %
OSHA PEL: 15 mg/m^3
ACGIH TWA: 10 mg/m^3
OSHA PEL: 3.5 mg/m^3
ACGIH TWA: 3.5 mg/m^3
3. HAZARDS IDENTIFICATION
PRIMARY ENTRY ROUTES:
ACUTE SKIN EFFECTS:
Developer Type 2 Black
RTN Number: 00003303
Page 1 of 5
November 3, 2005
Carbon Black was reclassified as a Group 2B by IARC in 1996 based on the result of only the inhalation study in rats. However
there was not observed the incidence of tumors on the test results on dermal or oral studies. Also 2-years inhalation study using a
typical toner containing carbon black showed no association between toner exposure and animal tumors.
MEDICAL CONDITION AGGRAVATED BY LONG-TERM EXPOSURE:
Prolonged inhalation of excessive dust may cause lung damage. It is attributed to 'lung overloading', a generic response to excessive
amounts of any dust retained in the lung for a prolonged interval. Use of this product, as intended, does not result in inhalation of
4. FIRST AID MEASURES
EYE CONTACT FIRST AID:
Immediately wash eyes with plenty of water. If unsuccessful, get medical attention.
SKIN CONTACT FIRST AID:
Wash thoroughly with soap and water.
INHALATION FIRST AID:
Gargle with water, move to place in fresh air. If unsuccessful, get medical attention.