Superior No. 70-5. MSDS. Page 1
MATERIAL SAFETY DATA SHEET
SUPERIOR NO. 70-5
DATE REVISED: January 1, 2009
Product Name: Superior No. 70-5
Manufacturer: Superior Flux & Mfg. Co. 6615 Parkland Blvd. Cleveland, OH 44139
Emergency Phone Number: 1-800-424-9300 (CHEMTREC)
Other Information Calls: 800-654-9011
To the Purchaser: This MSDS contains important environmental, health, and toxicology information for your employees who have
ordered this product. Please be sure this information is given to them. If you resell this product, a copy of the MSDS should be given to
the buyer.
H.M.I.S. INFORMATION: HEALTH = 2
FLAMMABILITY = 1
REACTIVITY = 1
SECTION I – IDENTIFICATION
Common Name: Superior No. 70-5
Chemical Name: NA
Chemical Family: Inorganic acid petrolatum based tinning flux
CAS Number: NA
Formula: See below
SECTION II - COMPOSITION INFORMATION
Components
CAS Number
%
OSHA PEL
Zinc Chloride
7646-85-7
20-25
1 mg/m3
Tin
7440-31-5
5-10
2 mg/m3
Unlisted percentages are non-hazardous stabilizers, and water. None of the materials in this product are
listed in NTP, IARC, or OSHA as carcinogens.
SECTION III - HEALTH HAZARDS
Primary Routes of Entry: Fume inhalation, ingestion, skin, and eyes.
Symptoms of Overexposure: Pulmonary edema, abdominal pain, vomiting, eye damage and skin burn.
Medical Conditions Generally Aggravated by Overexposure: None presently known.
Chemical Listed as a Carcinogen or Potential Carcinogen: None
OSHA Permissible Exposure Limit (PEL): 1 mg/m3
ACGIH Threshold Limit Value (TLV): 1 mg/m3
SECTION IV - EMERGENCY AND FIRST AID PROCEDURES
Eyes:
Flush with water for 10 minutes. Call a physician.
Skin:
Wash thoroughly with water.
Inhalation:
Remove to fresh air or administer oxygen. Call physician.
Ingestion:
Give water or milk. Get medical attention.
Superior No. 70-5. MSDS. Page 2
SECTION V - FIRE AND EXPLOSION HAZARD DATA
Flash Point: 204°C/400°F
Fla