Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
SM-619
G127, GP127
Gl27E, GPl27E
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Service
Manual
SM 619
Jan 1998
G127
GP127
Gl27E
GP127E
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Arrangement and Use of This Manual
Clark arranges parts and service procedures
by standardized Groups. In this manual,
Groups are similar to “chapters.” Groups are
listed on the “Contents” page.
Each Group begins with a table of contents
that shows the Sections contained within the
Group. Lengthy Sections also begin with a
table of contents.
Each Group and Section has an identifying
name and number, or “ID.”
Each page also has a unique ID. The page ID
consists of three numbers separated by hy-
phens. The three numbers
represent
the
Group number, the Section number, and the
page number. For Example, “00-1-2” on the
lower corner of the page indicates Group 00,
Section 1, Page 2.
The Group number sometimes has a letter or
letters added to it in parentheses if one or more
variations of the Group exist. For example, if
the truck has a standard transaxle, Group 06
is expressed as “06(S);” if the truck has a hy-
drostatic transmission, Group 06 is expressed
as “06(H).”
You can quickly locate a specific point in the
manual by using the headers and footers that
appear on every Section page. The following
illustration points out these areas..
IL
-,
Group ID
Page IDA
Section ID
I
V
h Page ID
Manual ID
Section ID
IMPORTANT
This manual is intended for the use of
trained service personnel. Please read
Group SA, “Safe Maintenance” and the
Operator’s Manual before working on or
operating the truck.
Copyright Clark Material Handling 1998
SM 619, Jan ‘98
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
ClRRU
Foreword
Foreword
This service publication provides
information covering
normal serv