Service Repair Manual
Model: 315C EXCAVATOR BTL
Configuration: ISJ HEX COMMONALITY CHART BTL00001-UP (MACHINE)
Disassembly and Assembly
315C Excavator Machine Systems
Media Number -RENR5525-05
Publication Date -01/11/2008
Date Updated -10/11/2008
Travel Motor - Disassemble
SMCS - 4351-015
Tool Part Number Part Description Qty
a. Remove the piston motor (travel). Refer to Disassembly and Assembly, "Piston Motor
(Travel) - Remove".
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
ISJ HEX COMMONALITY CHART BTL00001-UP (MACHINE)(SEBP5600 - 00) - ...
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on the motor and on all hose assemblies for installation purposes
and for the purpose of orientation. Plug all hose assemblies. This will help to prevent fluid loss
and this helps to keep contaminants from entering the system.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
1. Remove bolts (1).
ISJ HEX COMMONALITY CHART BTL