Material Safety Data Sheet
Telephone #(s): Safety Information: (800) 828-6571
Health Emergency: (585) 422-2177
Rochester, NY 14644
Transportation Emergency (Chemtrec):(800) 424 - 9300
Section I - Product Identification
Part No.: WH: 5R207, 5R60276;
XCL: 5R539; RX: 5R238;
Kits: 97S10592, 97S10593
This is not a WHMIS controlled product
Ingredients (% by wt.)
Cu-Zn ferrite powder1 (>90%):
Halogenated polyethylene (<1%)
Styrene/acrylate polymer (<1%)
Blue pigment (<1%)
Polypropylene wax (<1%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
Section III - Toxicology and Health Information
This material has been evaluated by Xerox Corporation. The toxicity data presented below is for toner only and based on test results
of similar xerographic materials.
>5 g/kg (rats) practically non-toxic.
10mg/m3 (total dust)
>5 g/kg (rabbits) practically non-toxic.
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure)practically non-toxic.
5 mg/m3 (res