Service Repair Manual
Models
D11T CARRY DOZER
TRACK-TYPE TRACTOR
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11T TRACK-TYPE TRACTOR JEL
Configuration: D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 Engine
Disassembly and Assembly
D11T Track-Type Tractor Power Train
Media Number -KENR5620-00
Publication Date -01/08/2011
Date Updated -26/08/2011
i06671320
Track Roller Frame - Disassemble
SMCS - 4151-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
105-3349
Strap
1
B
3S-6224
Electric Hydraulic Pump Gp
1
6V-3175
Hydraulic Cylinder Gp
1
4C-9634
Puller Stud
1
5P-7270
Sleeve
1
1P-1840
Bearing Puller Adapter
1
9U-6832
Nut
1
3H-0467
Puller Washer
1
C
FT-1713
Wedge
1
D
2D-1201
Eyebolt
1
Start By:
a. Remove the track roller frame or the front track roller frame. Refer to Disassembly and
Assembly, "Track Roller Frame - Remove".
b. Remove the idlers. Refer to Disassembly and Assembly, "Idlers - Remove".
1/6
D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 E...
2020/2/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat® products.
Dispose of all fluids according to local regulations and mandates.
Note: The disassembly procedure for the track roller frame and the front track roller frame is the
same procedure. Only the front track roller frame is shown.
Illustration 1
g01425527
1. Fasten a suitable lifting device to track roller (1).
2. Remove bolts (3) and caps (2) and remove the track roller. The weight of track roller is
appro