Technical
Publications
Lexington, KY 40510
www.Clarkmhc.com
SM-751
C60-80 D
C60-75L
Service Manual
December 2007
Truck Models Covered by this Manual
This manual consists of “base” module that pertains
to all C60-80 models and other modules that pertain
only to specific models. Manuals shipped with the
truck contain the base module and the modules spe-
cific to the purchased truck.
You may, however, purchase specific modules and
expand your manual to fully cover multiple models.
To do so, order the desired modules as you would
any other Clark part.
Arrangement and Us e of this Manual
Clark arranges parts and service procedures by stan-
dardized Groups. In this manual, Groups are similar
to “chapters”. Groups are listed in the indexes on the
next page.
Each Group begins with a table of contents that
shows the Sections contained within the Group.
Lengthy Sections also begin with a table of contents.
Each Group and Section has
n identifying name and
number, or “ID”.
Each page also has a unique ID. The page ID con-
sists of three numbers separated by hyphens. The
three numbers represent the Group number, the Sec-
tion number, and the page number. For example,
“00-1-2” on the lower corner of the page indicates
Group 00, Section 1, page 2.
The Group number sometimes has a letter or letters
added to it in parentheses if
one or more variations of
the Group exist. For example, if the truck has a stan-
dard transaxle, Group 06 is expressed as “06(S)”; if
the truck has a hydrostatic transmission, Group 06 is
expressed as “06(H)”.
You can quickly locate a sp
ecific point in the manual
by using the headers and footers that appear on every
Section page. The following
illustration points out
these areas.
This manual is intended for the use of trained service
personnel. Please read Group SA, “Safe Mainte-
nance”, and the Operator’s Manual before working
on or operating the truck.
CONTENTS
SM 751, Nov ’06
CONTENTS-1
CONTENTS
Contents of this Manual
Group Index
Group SA. Safe Maintenance
Group PS. Periodic Service
Group 00. Eng