Operation manual of CNQ100 X 10 Desilter
Operation Manual of type CNQ100×10 Desilter
GN Solids Control
Tangshan Guanneng Machine Equipment CO., LTD.
http://www.gnsolidscontrol.com All rights reserved by GN Solids Control
Operation manual of CNQ100 X 10 Desilter
http://www.gnsolidscontrol.com All rights reserved by GN Solids Control
1
Index
I．
Operating Principle and Structure Feature
II．
Specification
III．
Assembly and Debugging
IV．
Maintenance
Operation manual of CNQ100 X 10 Desilter
http://www.gnsolidscontrol.com All rights reserved by GN Solids Control
2
I． Operating Principle and Structure Feature
CNQ100×10 sand cleaner is a combination of cyclone desilter and shale shaker of
drilling fluid. The PU material & high chromium cast iron is used for hydrocyclone.
The lower little shale shaker is elliptical. The vibration generator is driven by vibration
motor, in which keep the screen box wholly shake forward with an elliptical type.
II．Specification
Hydrocyclone diameter 100mm
Hydrocyclone number 10
Admission manifold diameter 150mm
Overflow manifold diameter 200mm
Separated particles diameter ≥15μm
Working pressure 0.25-0.4Mpa
Capacity 28-54L/S
Vibration motor power 0.8kw
Effective screen area 1800×600mm²
Dimension 1465×1160×1750mm
Weight 1100kg
Ⅲ. Assembly and Debugging
1. Connect the grout outlet of sand pump and admission inlet with 6" rubber pipe.
The gas hole installed on the top of overflow pipe is used for preventing the siphon
effects. A little drilling fluid will be flowed from air-bleed hole when the desilter is
running. Air-bleed hole can not be blocked. If n