PRODUCT AND COMPANY IDENTIFICATION
1
Manufacturer:
The Blaster Corporation
8500 Sweet Valley Drive
Valley View, Ohio 44125
(216) 901-5800
(216) 901-5801 fax
www.blasterproducts.com
24 Hour emergency contact: Chemtrec (800) 424-9300
Contact Cleaner
03/24/09
CC - aerosol
16-CC
Product Name:
Revision Date:
MSDS Number:
Product Code:
COMPOSITION/INFORMATION ON INGREDIENTS
2
Hazardous Ingredients
CAS #
Percent
Exposure Limits
n-Propyl bromide 106-94-5
>90% See section 15
Carbon Dioxide 124-38-9 <3% OSHA (TWA)- 5000 ppm
ACGIH (TWA)- 5000 ppm
HAZARDS IDENTIFICATION
3
eyes, skin, inhalation, ingestion
Route of Entry:
Target Organs:
May irritate the nose, throat, and lungs. Exposure to high doses may cause central nervous system
depression. Such doses may also cause adverse effect in liver, kidney and lung.
Inhalation:
May cause irritation.
Skin Contact:
May cause irritation.
Eye Contact:
Low toxicity, not expected to be a hazard in normal use.
Ingestion:
May aggravate a pre-existing skin and respiratory disorders.
Physical Hazard: Aerosol containers are pressurized (even when empty!) Do not expose to temperatures above 1200 F. Do
not puncture or burn can. Failure to observe these precautions may result in rapid and violent decompression of the container
producing projectiles and atomization of the liquid contents.
Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and
nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Contact Cleaner
Material Safety Data Sheet
Revision Date: 03/24/09
MSDS Number: CC - aerosol
Page
of
1
5
MSDS The Blaster Corporation
FIRST AID MEASURES
4
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Continue to monitor. Get medical attention.
Inhalation:
Remove contaminated clothing immediately! Wash skin with soap & water. If irritation persists,