Cubicle Curtain Specifications
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General
and Supplementary Conditions and Division 1 Sections, apply to this
A. This section includes the following:
1. Curtain track and curtain carriers.
2. Cubicle curtains.
3. I.V. track and bottle holders.
1.3 PERFORMANCE REQUIREMENTS
A. Curtains: Provide curtain fabric with the following characteristics:
1. Fabrics are flame resistant and are identical to those that
have passed NFPA 701 when tested by a testing and
inspecting agency acceptable to authorities having
a. Identify fabrics with appropriate markings
of applicable testing and inspecting agency.
A. Product Data: Include durability, laundry temperature limit, fade
resistance, and fire test response characteristics for each type of curtain
B. Shop Drawings: Show layouts and types of cubicles, size of curtains,
number of carriers, anchorage details, and conditions requiring
accessories. Indicate dimensions taken from field measurements.
C. Samples for Initial Selection: For each type of curtain material
D. Samples for Verification: For each type of product required. Samples
of size indicated below.
1. Curtain Fabric: 12 inches square swatch. Mark top and
face of material.
2. Mesh Top: Not less then 4 inches.
1.5 PROJECT CONDITIONS
A. Environmental Limitations: Do not install cubicles until spaces are
enclosed and weatherproof, wet work in spaces is complete and dry, work
above ceilings is complete, and ambient temperature and humidity
conditions are maintained at the levels indicated for project when occupied
for its intended use.
PART 2 – PRODUCTS
2.1 CURTAIN TRACKS
A. Manufacturer: Cubicle curtain track shall be Model IFC-98, as
manufactured by Imperial Fastener Co., or Architect approved equal.
B. Extruded Aluminum Track: Cubicle track shall be extruded 6063-T5
aluminum, 1 3/8” by 3/4” by .058”