Service Repair Manual
Models
962H Wheel Loader
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962H WHEEL LOADER J6J
Configuration: 962H WHEEL LOADER J6J00001-UP (MACHINE) POWERED BY C7 ENGINE
Disassembly and Assembly
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems
Media Number -RENR8881-01
Publication Date -01/06/2009
Date Updated -08/06/2009
i02362326
Pilot Valve (Command Control Steering) - Install
SMCS - 4342-012
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1
g00493364
1. Position steering pilot valve (6) and install bolts (5) .
1/3
962H WHEEL LOADER J6J00001-UP (MACHINE) POWERED BY C7 ENGINE(X...
2020/3/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2
g00493363
2. Connect hose assemblies (4) .
Illustration 3
g00439805
3. Place steering shaft (3) in the original position.
Illustration 4
g00439803
4. Install bottom shaft yoke (1) on the shaft of the steering pilot valve.
2/3
962H WHEEL LOADER J6J00001-UP (MACHINE) POWERED BY C7 ENGINE(X...
2020/3/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Install the nut and bolt (2) .
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame
Lock - Separate and Connect".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Mar 22 13:14:47 UTC+0800 2020
3/3
962H WHEEL LOADER J6J00001-UP (MACHINE) POWERED BY C7 ENGINE(X...
2020/3/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962H WHEEL LOADER J6J
Configuration: 962H W