Brother MFC J995DW Setup - Guide
Brother MFC J995DW setup printer is an inkjet type printer with two print heads; black
and color. The interface specifications for this printer are USB, LAN (Ethernet UTP
cable), Wireless LAN and NFC. You can perform the copy and scan operations in
both color and black. The setup and driver installation of the Brother MFC J995DW
printer is also quite easy to perform. The guided instructions will help you set up your
Brother MFC J995DW printer for the first time.
Unpack the Brother MFC J995DW printer package.
Check if the components such as a set of genuine ink cartridges, quick setup
guide, product safety guide, Brother installation Disc, and telephone line
cord are provided along with the Brother MFC J995DW printer.
If not, contact the dealer and ask for the missing component(s).
Now, remove all the protective tapes from the printer.
Begin the hardware installation by loading a stack of A4 paper in the front tray of
Take the paper tray out of the Brother MFC J995DW setup printer.
Place a stack of plain paper in it.
Make sure to adjust the paper guides properly to avoid paper jam.
After loading papers, and replace the tray into the printer.
Switch on your Brother MFC J995DW printer.
Unpack the ink cartridges.
Open the ink cartridge door.
Insert the unpacked ink cartridges into the respective slots.
Make sure to quick shake the black ink cartridge before inserting it into its slot.
After inserting the ink cartridges, close the cartridge cover.
Now, set the basic printer preferences as instructed on the printer’s LED screen.
If required, configure your Brother MFC J995DW printer for the fax setup.
You can use the Wired, USB or Wireless Connection type to connect your
Brother MFC J995DW printer to the device.
Insert the Brother MFC J995DW driver installation CD into your system CD drive.
If your system (Mac) does not have the CD drive, then download the Brother
MFC J995DW printer driver from the