Quick Steps - HP Deskjet 2545 Setup
Follow the guidelines given below to set up and install the 123.hp.com/dj2545 printer.
Open the HP Deskjet 2545 cardboard box.
Take the HP Deskjet USB cable, power cable, black 678 cartridge, and the
tricolor 678 cartridge out of the cardboard box.
You can remove the user guide and HP Deskjet driver CD out of the box as well.
There is also a pictorial guide to set up the 123.hp.com/setup 2545 printer. Set it
The Getting started guide is included in the HP Deskjet box. Pull out the plastic
bag containing the HP Deskjet 2545 setup printer device from the cardboard box.
Lift the blue tapes and peel them away from the 123.hp.com/setup 2545 printer.
Open the HP Deskjet ink cartridge access door, remove the cardboard sheet
from the cartridge slot, and close the door.
Attach the purple plug to the rear of the HP Deskjet device. Plug the other HP
Deskjet cable component into the HP adapter and its free end into the power
Press the Power button on the 123.hp.com/setup 2545 control panel
Take the 678 black cartridge out of the package and remove the orange ink seal.
Open the HP Deskjet 2545 ink cartridge door and wait until its cartridge carrier
Place the 678 black cartridge in its slot, push it in, and move it up till you hear a
click. Repeat the steps for installing the 678 tricolor cartridge.
Close the HP Deskjet cartridge door and feed paper sheets into the device’s
paper input tray.
Open the HP Deskjet output tray and press the Wi-Fi button.
The 123.hp.com/dj2545 prints a page with further instructions for installation.
This concludes the HP Deskjet 2545 setup and installation of the HP Deskjet
2545 printer for first-time use.
You can follow the short guidelines mentioned below to install the 123.hp.com/setup
2545 driver on Windows and Mac computers.
Click the Download button located below the Windows or Mac section of the HP
Deskjet driver 2545 passage to initiate the download.