MSDS Number CIR00001
1
The MSDS format adheres to U.S standards and regulatory requirements and
may not meet regulatory requirements in other countries.
This information is based upon technical information believed to be reliable. It is
subject to revision as additional knowledge and experience are gained.
CIRLEX™ THICK POLYIMIDE, H TYPES
CIR000001
Revised 8OCT1996
Printed 5JAN1999
CHEMICAL PRODUCT/COMPANY IDENTIFICATION
Material Identification
Cirlex is a registered trademark of DuPont.
Trade names and Synonyms
Cirlex™ HNZT
Cirlex™ HZT
Cirlex™ CL HN
Company Identification
Manufacturer/Distributor
DuPont
High Performance Films
P.O.Box 89
Circleville, OH 43113
Phone Numbers:
Product Information:
(800) 2374357
Transport Emergency: (800) 4249300
Medical Emergency:
(800) 4413637
COMPOSITION/INFORMATION ON INGREDIENTS
Components
Material
CASE NUMBER
INERT POLYIMIDE FILM
100
Exposure limits for the following may apply:
MSDS Number CIR00001
2
DIMETHYL ACETAMIDE (residual in film)
127195 <1
POLYIMIDE POLYMER (as nuisance dust)
Components (Remarks)
All reportable ingredients are listed in the TSCA Chemical
Substance Inventory.
HAZARDS INDENTIFICATION
Potential Health Effects
INHALATION: Not a probable route of exposure from film.
For the polymer from which the film is made, DuPont
Recommends treating polymer dust as a nuisance particulate.
SKIN CONTACT: No irritation is expected from handling film.
Less than 1 ppm dim ethyl acetamide was extracted from film
By distilled water a 40 deg C for 4 hours.
EYE CONTACT: Not probable route of exposure for film.
INGESTION:
Not probable route of exposure for film.
Carclnogenicity information
None of the components present in this material at concentrations
Equal to or greater than 0.1° are listed by IARC, NTP, OSHA OR ACGIH
as a carcinogen.
FIRST AID MEASURES
First Aid
INHALATION
Not probable route of exposure for film.
SKIN CONTACT
Wash with soap and water after handling. If skin irritation develops, con