© Copyright 2004 Edwards
3-94
V
I
S
U
A
L
S
I
G
N
A
L
S
90 Fieldstone Court | Cheshire, CT 06410
Ph: 203.699.3300 | Fx: 203.699.3108
www.edwards-signals.com
The Chameleon is designed to function as either a steady or
flashing visual signal. It is designed such that any or all three lights
can be activated by a PLC or contact closure. The first light
activated will illuminate either steady or flashing (set by an internal
jumper). If a second light is activated, the Chameleon cycles
between the two colors. A third activation causes the Chameleon to
cycle between all three colors: red, amber, and green or red, amber,
and blue. One additional lens module and light source – strobe,
halogen, incandescent or LED – can be added for a fourth signal.
The 108-DN Series Multi-Status Indicator utilizes the same
DeviceNet interface as the 102 Series Triliptical Stacklight. It has
been tested by ODVA's authorized independent test lab and
complies with ODVA conformance test and software.
The 108I Series features a multi-tone base module that allows the
installer to select one of the following eight available tone options:
stutter beep, continuous, 3 pulse horn, rapid siren, hi/lo, fast whoop,
yeow and beep. The selected tone can be operated as an additional
signal or used in conjunction with any of the visual signals. The
signal is rated at 85 dB at 5 feet (1.63m). The 108-DN features the
same eight tones but allows all to be activated over the DeviceNet
network. The 108 is also available without tone capability in direct
surface and 2 inch (51mm) pipe mount bases.
3/4" (19mm) NPT conduit pipe mounting or surface mounting in
non-hazardous dust and weatherproof applications.
For indoor applications, may be vertically mounted with lenses
facing up or down. For weatherproof installation, it is recommended
that the unit be conduit mounted vertically with lenses facing up.
Chameleon®
Multi-Status Indicator
108 & 108-DN Series
PLC Compatible, DeviceNetTM
FEATURES
> 120,000 hr. LED light sources
> PLC compatible
> DeviceNet models