AOKliving Household Items Co., Ltd
Bring AOK Living to Every Family; Make Better Living everyday!
Leo Huang Email: sales@ateliving.com Website: http://www.aokliving.com
1
Electric Remote Control Motorized window Curtain Assembly Instructions(Center Opening)
(I) Connecting the Main Track w/Extension Track(s)
See above p101
a1) Unscrew the screw on Carrier-A and take out the Metal Clip. (Remember how the Steel Wire is placed as
V-shaped)
a2) Cut off the cable ties and hold the coils.
a3) Uncoil about 4 feet of the Steel Wire and tie the rest of coils.
(Remove any twists with care and make sure the steel wire is not tangling.)
See above p102
AOKliving Household Items Co., Ltd
Bring AOK Living to Every Family; Make Better Living everyday!
Leo Huang Email: sales@ateliving.com Website: http://www.aokliving.com
2
b1) At the End Base, unscrew and take the L-Shaped Clip out.
See above p103
c1) Pull the End Base out of the track in the direction along the track carefully.
c2) The Steel Wire will go along with the End Base.
c3) While pulling the End Base, hold Carrier-A, Carrier-B and Curtain Runners.
c4) Do not let Carrier-A , Carrier-B and Curtain Runners drop out of the track.
c5) Make sure not to twist and coil the Steel Wire itself.
c6) Make sure do not twist the Steel Wire with the track.
c7) Keep pulling the End Base until the Steel Wire is long enough to insert an Extension Track.
AOKliving Household Items Co., Ltd
Bring AOK Living to Every Family; Make Better Living everyday!
Leo Huang Email: sales@ateliving.com Website: http://www.aokliving.com
3
See p104
d1) Connect the Main Track and Extension Track by using the Track Connector
d2) Fasten the 3 screws on the Connector.
d3) Repeat the procedures a3), c1) to d2) until the length wanted. The Extension Track can be cut off to fit the exact
length.
d4) After connecting all the Tracks, remove or add Curtain Runners as needed.
d5) Put the End Base to the end