Rev. 3 - 08/00
Copyright© 1998-2000, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
(NC205 Event Printing Option)
The PM263 Serial Communication Card (connected to an
NC205 CE) adds event printing capability to the Tek-
DIGICARE™ Nurse Call System. If connected to a
compatible printer (Okidata 182 with serial interface or
equivalent), it will provide the necessary information for
the printer to generate an event printout.
The printout will provide facility management with im-
portant information such as STATION number, EVENT
description, and ZONE location of all events generated by
all peripherals connected to that system (master included).
If paging capability is desired, the PM263 Serial Output
can be connected to a pager transmitter (NC365A to allow
call data to be sent to a pocket-pager (NC395). Call types
may be filtered via NC365A and NC395 programming.
The PM263 also provides a means of communicating the
same event information about its particular system to
management monitoring computer systems, via a stan-
dard 9600 baud serial communications port. Available
anytime in the future.
• Can be used as an upgrade to existing Tek-
DIGICARE™ Systems and/or added at time of order
(contact factory for more details)
• Compact - combination serial/PROM card
Height: 0.63" (50.5mm)
(2.06" with mounting bracket)
Length: 4.50" (114.3mm)
Width: 3.00" (76.2mm)
Construction: Electronic components mounted on a
double-sided plated circuit board
25 pin connector for printer
NC260A Series Central Equipment
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.