Having a tensile testing machine with medium capacity system make sure force, displacement, and strain are automatically measured, displayed and reported. The MTI engineered medium capacity tensile testing system allows easy setup of two entirely different types of tests without having to remove and reposition hardware on a frequent basis. Ensure a fully automatic mode of operation buying the best medium capacity system online from MTI. Need more info? Visit us online or get in touch at 770-587-2222. http://tensiletestmachines.com.
Universal testing systems are used in every industry to check the tensile strength of the materials.
However, most of the time, medium capacity systems are used. In this PDF, we will discuss
some important points about the same.
Medium capacity systems are also known as mid-force universal testing systems that are
supplied with the powerful Intel Core i5 Pentium based Data Acquisition, analysis, and control
With that, it is also a universal load cell, universal joint, and fixture linkages that are provided
and a linkage rod passes without any obstacles through holes machined into the upper and lower
surfaces of the moving crosshead and connects to the system load cell. Such load fixture links
the rod projecting into both test bays.
Also known as dual test bay configuration, it allows for easy setup of two entirely different types
of tests without having to remove and reposition the hardware frequently.
While measuring the force and displacement and strain, it is automatically measured, displayed,
Must-Read PDF about Medium Capacity Systems – Measurements Technology
What are the accessories of the Medium Capacity systems?
1. Double precision rolled ball screws with preloaded multiple circuit ball nuts that provide
smooth and precise crosshead motion under the full operating load range.
2. Heavy fan-fold that protects the lead screws and linear travel bearing from contamination
3. It can be mounted on a crosshead of any type to accommodate all the testing conditions
including elevated and cryogenic temperature testing requirements.
4. Moreover, a universal joint and linkage for attaching to tensile wedge grips or similar test
fixtures are furnished.
If you are looking for any medium capacity systems, then
GET IN TOUCH
Measurements Technology, Inc.
600 Kirk Rd, Suite B
Marietta, GA 30060