Instructor Notes:
CATIA V5 Fundamentals - Lesson 3: Basic Features
Copyright DASSAULT SYSTEMES
3-1
Copyright DASSAULT SYSTEMES
Lesson 3: Basic Features
In this lesson, you will learn how to create basic CATIA features.
Case Study: Basic Features
Design Intent
Stages in the Process
Access the Part Design Workbench
Creating a Base Feature
Creating Pads and Pockets
Creating Holes
Creating Fillets and Chamfers
Model View Options
Duration: Approximately 0.33 day
Lesson content:
Lesson Content
Student guide: Lesson 3- Basic Features
Introduce the lesson. Present the lesson objectives and topics.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 3: Basic Features
Copyright DASSAULT SYSTEMES
3-2
Copyright DASSAULT SYSTEMES
What are the Basic Features in Part Design?
A
B
C
D
E
Part design includes many features that help the user create a model. The most
common of these features will be introduced in this lesson:
Basic Features in Part Design
Student Guide: Lesson 3- Basic Features in Part Design
Review the features.
Do not go into detail. Features will be discussed throughout the lesson.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 3: Basic Features
Copyright DASSAULT SYSTEMES
3-3
Copyright DASSAULT SYSTEMES
Case Study: Basic Features
The case study for this lesson is the engine support used in the drill support assembly and
shown below. The engine support is part of the Bloc Engine sub-assembly. The focus of
this case study is the creation of a features that incorporate the design intent for the part.
The engine support will consists of a pad, pockets, a hole, fillets and a chamfer which can
all be accessed through the Part Design Workbench.
Case Study: Basic Features
Student Gu