Service Repair Manual
Models
336F and 336F L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR DSW
Configuration: 336F & 336F L Excavators DSW00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04
Publication Date -01/02/2018
Date Updated -21/02/2018
i03863290
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1U-7506
Adapter
1
8T-4244
Nut
6
8T-4223
Hard Washer
6
-
M12 x 1.75 by 250 mm (10 inch) Threaded Rod
1
B
8T-0651
Bolt
1
8T-4167
Hard Washer
1
C
3E-3882
Eyebolt
1
D
1P-1859
Retaining Ring Pliers
1
E
1P-0510
Driver Gp
1
9S-9152
Bearing Puller Gp
1
F
1P-1861
Retaining Ring Pliers
1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
1/10
336F & 336F L Excavators DSW00001-UP (MACHINE) POWERED BY C9.3 Engin...
2020/6/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1
g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10
336F & 336F L Excavators DSW00001-UP (MACHINE) POWERED BY C9.3 Engin...
2020/6/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 2
g00887302
5. Remove O-ring seal (3), port