Material Safety Data Sheet
Telephone #(s): Safety Information: (800) 828-6571
Health Emergency: (716) 422-2177
Rochester, NY 14644
Transportation Emergency: (716)422-1230
Section I - Product Identification
4700/5775 Yellow Developer
5R193*, 5R90177, 5R535*,
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Cu-Zn ferrite (85-95%)1
Styrene/butadiene copolymer (5-10%)
C.I. Pigment Yellow 97 (0.5-1%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
Section III - Toxicology and Health Information
The toxicology of this developer has been evaluated by Xerox Coporation. Data presented in this section is based on test resul ts of
the toner or similar reprographic toners. The major component is not included due to its toxicological inertness and large particle
>5 g/kg (rats)
10 mg/m3 (total dust)
>5 g/kg (rabbits)
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure)
5 mg/m3 (respirable dust)
>20 mg/l (rats, calculated 1 hr exposure)
Non-senitizing (guinea pigs; human patch)
2.5 mg/m3 (total dust)
Non-irritating (rabbits, human patch)
0.4 mg/m3 (respirable dust)
No mutagenicity detected in Ames, UDS, and Micronucleus Assays.
>1000 mg/l (fathead m