Material Safety Data Sheet
Manufacturer: Xerox Corporation
Safety Information: (800) 828-6571
Rochester, NY 14644
Health Emergency: (585) 422-2177
Transportation Emergency (Chemtrec): (800)) 424-9300
Section I - Product Identification
Trade Names/Synonyms: 7041/7042, Document Work Centre Pro
6R287, 106R67, 106R365
635/645/657 Toner (only)
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Iron oxide (50-65%)
Styrene/acrylate polymer (40-50%)
Polypropylene wax (1-5%)
Amorphous silica (0.1-1%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
Section III - Toxicology and Health Information
This material has been evaluated by Xerox Corporation. The toxicity data noted below is based on test results of similar
reprographic toner materials
>5 g/kg (rats) practically non-toxic.
10mg/m3 (total dust)
>5 g/kg (rabbits) practically non-toxic.
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure) practically non-toxic.
5 mg/m3 (respirable dust)
>20 mg/l (rats, calculated 1 hr exposure) non-poisonous, DOT.
Not an irritant.
Skin Sensitization: Not a sensitizer.
XEL1: 2.5 mg/m3 (total dust