Care & Safety
Body & Framework
530, 533, 535, 540
from Serial No. 767001
PUBLISHED BY THE
TECHNICAL PUBLICATIONS DEPARTMENT
OF JCB SERVICE; ©
WORLD PARTS CENTRE, WATERLOO
ST14 5PA, ENGLAND
Tel. 01889 - 590312
PRINTED IN ENGLAND
Publication No. 9803/3630
This publication is designed for the benefit of JCB Distributor Service Engineers who are receiving, or have received, training
by JCB International Training Centre.
These personnel should have a sound knowledge of workshop practice, safety procedures, and general techniques associated
with the maintenance and repair of hydraulic earthmoving equipment.
Renewal of oil seals, gaskets, etc., and any component showing obvious signs of wear or damage is expected as a matter of
course. It is expected that components will be cleaned and lubricated where appropriate, and that any opened hose or pipe
connections will be blanked to prevent excessive loss of hydraulic fluid and ingress of dirt. Finally, please remember above all
else SAFETY MUST COME FIRST!
How to use this manual
The manual is compiled in sections, the first three are numbered and contain information as follows:
= General Information - includes torque settings and service tools.
= Care & Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.
= Routine Maintenance - includes service schedules and recommended lubricants for all the machine.
The remaining sections are alphabetically coded and deal with Dismantling, Overhaul etc. of specific components, for example:
= Body & Framework
The page numbering in each alphabetically coded section is not continuous. This allows for the insertion of new items in later
issues of the manual.
Section contents, technical data, circuit descriptions, operation descriptions etc are inserted at the beginni