Service Repair Manual
Models
M318C WHEELED Excavator
Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M318C WHEELED EXCAVATOR BCZ
Configuration: M318C Excavator BCZ00001-02000 (MACHINE) POWERED BY 3056 Engine
Disassembly and Assembly
M318C Excavator Machine Systems
Media Number -RENR6676-06
Publication Date -01/12/2006
Date Updated -05/12/2006
i03484340
Swing Drive - Assemble
SMCS - 5459-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
138-7575
Link Bracket
2
B
1P-0510
Driver Gp
1
C
1U-8759
Plier Tips
1
D
5P-4758
Retaining Ring Pliers
1
E
1P-1859
Retaining Ring Pliers
1
F
1P-1855
Retaining Ring Pliers
1
H
1P-1863
Retaining Ring Pliers
1
J
305-4538
Spanner Socket(1)
1
240-8274
Insert(2)
1
174-9465
Spanner Socket(3)
1
K
1P-0520
Driver Gp
1
L
2S-3230
Bearing Lubricant
1
M
8T-5096
Dial Indicator Gp
1
N
7H-1680
Lubrication Hand Pump
1
(1) Used on the part number 152-7372 Swing Drive Gp
1/12(W)
w
2020/4/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
(2) Used on the part number 152-7372 Swing Drive Gp
(3) Used on the part number 152-7375 Swing Drive Gp
Note: Replace all O-ring seals and all gaskets. Apply a light film of "10W" oil to all components
before assembly.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1
g01027198
1. Lower the temperature of bearing cup (39). Use Tooling (K) to install bearing cup (39) in
swing drive housing (33A).
Illustration 2
g00906881
2. Lower the temperature of bearing cup (36). Use Tooling (K) to install bearing cup (36).
3. Use Tooling (B) to install lip seal (35). Install seal (34). Install tooling (L) to seal (34)