JCB Drivetrain Systems Ltd
Tel: (01978) 661140
Fax: (01978) 661863
Care & Safety
PD 55 AXLE
Publication No. 9803/9260
All references in this manual to ‘Forward’ and
‘Reverse’ assume a front-mounted engine.
1 - 1
Axle Serial Plate
The axle serial number is stamped on a plate mounted on
the face of the axle, as shown.
1 When replacement parts are required, always ensure
that the correct parts are obtained, e.g. in the case of
gear replacements, always check the part number
stamped on the gear, and the number of teeth.
2 When ordering replacement parts, quote the details on
the serial plate shown.
It is essential that all gaskets and seals removed while
dismantling, should be renewed on reassembly.
4 On reassembly care should be taken that all parts are
correctly replaced since any component omitted or
incorrectly assembled can lead to a complete failure.
Lubricants should comply with the recommended list
as provided in this manual. It is important to adhere to
the oil changing procedure.
It is advisable to lightly lubricate with a recommended
lubricant, parts such as gears, shafts, thrust washers
and oil seals during reassembly.
1 - 1
Axle Build Identification
To identify an axle build, the number on the axle data plate
should be cross-referenced with the part number in the parts
450 / 2760 / 1 / 0091
450/2760: Axle assembly part number (450/27600)
without the final zeros.
/1: Internal issue number of the main manufacturing
/0091: Axle serial number. The complete 12 digit number
must be quoted for warranty purposes. The parts
information will detail the number of friction plates
required for the axle.
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
If there is n