How To Configure Tenda F300 Router Setup?
Tenda F300 is a wireless router designed to be set in Client Router mode to support a
WISP connection. The Tenda F300 router setup is quite simple if you follow the quick
steps given below.
Before starting, verify that your modem is working properly and you are getting a
stable Internet connection from it.
Unpack the router from the product box and place it on a flat surface closer to the
Ensure that your modem is turned off.
Connect your modem and the router using the supplied Ethernet cable. The
Ethernet cable from the modem should be plugged into the router's WAN
Next, take another Ethernet cable and connect it to the router's LAN Connect the
other end of the cable to your Windows computer.
Turn on your modem and router.
Observe the LEDs on the router and ensure that they are functioning properly.
After completing the Tenda F300 router set up using the network cables, move on
to your computer.
Open the default browser and enter your router's IP address in the URL.