NNCSS Sucession BCM 3.0 Exam
A BCM 2.5 customer is running an application with one DSM 32+ module with 32
digital sets on two DS-30 resources and is using all remaining DS-30 resources for
trunking. If the customer upgrades to BCM 3.0, how many digital sets can be
You need to install 30 IP sets on a BCM 3.0. What action must you perform first to
enable these sets?
A. You need to add keycodes.
B. You need to program H.323 trunks.
C. You must connect the IP sets to the MSC.
D. You need to boot the BCM 3.0 with 30 IP sets connected.
You are converting a Norstar system to a BCM 3.0. The customer has existing analog
E&M trunks. How can you make these trunks work on the new system?
A. Install a DTM
B. Add keycodes
C. Program them on a FEM
D. Configure them on a BRI module
With BCM 3.0, digital station capacity is increased by using new DSMs. What
capability allows the new DSMs to achieve this increase?
A. new DSMs allow connection to more DS-30 resources
B. new DSMs allow access to B2 channels of DS-30 resources
C. new DSMs allow access to the D channel of DS-30 resources
D. new DSMs allow connection to the LAP-D channel of DS-30 resources
A customer has a 4X16 MBM installed on their BCM 3.0. Which configuration is
possible with this hardware?
A. four analog lines & 16 TCMs
B. a total of four H.323 trunks & 16 TCMs
C. four emergency telephones & 16 TCMs
D. a maximum of four ISDN lines & 16 TCMs
Your customer requires 2 CAP modules for their attendant set. What equipment do you
require to make these CAPs work?
A. A M7316 with one SAP
B. A M7324 with one SAP
C. A M7324 with two SAPs
D. A M7310 with two TCM connections
You are installing a BCM 3.0 with 16 IP trunks, 32 IP sets and 64