Service Repair Manual
Models
D5C III TRACK-TYPE
TRACTOR Dozer
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5C III TRACK-TYPE TRACTOR 5HS
Configuration: D5C & D5C LGP, XL Series III Hystat Tractors 5HS00001-UP (MACHINE) POWERED BY 3046 Engine
Disassembly and Assembly
D3C, D4C AND D5C SERIES III HYSTAT TRACK-TYPE TRACTOR POWER
Media Number -SENR1251-03
Publication Date -01/11/2004
Date Updated -08/04/2013
SENR12510004
Final Drives
SMCS - 4050-011; 4050-012; 4050-015; 4050-016
Remove Final Drives
Start By:
a. separation of tracks
b. remove batteries
Fluid Spillage Containment
Care must be taken to ensure that fluids are contained during performance of inspection,
maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with
suitable containers before opening any compartment or disassembling any component containing
fluids. Refer to "Tools And Shop Products Guide," NENG2500 for tools and supplies suitable to
collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and
mandates.
1/23
D5C & D5C LGP, XL Series III Hystat Tractors 5HS00001-UP (MACHINE) POWER...
2019/12/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove plugs (1) and (2) and drain the fluid from the final drive. The capacity of the final drive
is 20.5 L (5.5 gal U.S.).Install plugs (1) and (2) in the final drive.
2. Remove three bolts (3), washers and guard (4). Remove three bolts (5), washers and guard (6).
Remove four bolts (7), washers and guard (8).
3. Remove twenty-five bolts (9) and five sprocket segments (10).
4. Remove two bolts (11) and cushion assembly (12). Remove two bolts (13) and handhold (14).
2/23
D5C & D5C LGP, XL Series III Hystat Tractors 5HS00001-UP (MACHINE) POWER...
2019/12/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Adjust the bracket on Tooling (A) until dimension (X) is 225 mm (9 in).
6. Attach Tooling (A) to a hoist and to the final