Cisco-Training.net
1 In an IPv4 environment, what information is used by the router to forward data
packets from one interface of a router to another?
**destination network address
source network address
source MAC address
well known port destination address
2 What information is added during encapsulation at OSI Layer 3?
source and destination MAC
source and destination application protocol
source and destination port number
**source and destination IP address
3 In a connectionless system, which of the following is correct?
The destination is contacted before a packet is sent.
**The destination is not contacted before a packet is sent.
The destination sends an acknowledgement to the source that indicates the
packet was received.
The destination sends an acknowledgement to the source that requests the next
packet to be sent.
4 Which IP packet field will prevent endless loops?
type-of-service
identification
flags
**time-to-live
header checksum
5 Which portion of the network layer address does a router use to forward
packets?
host portion
broadcast address
**network portion
gateway address
6
Cisco-Training.net
Refer to the exhibit. Using the network in the exhibit, what would be the default
gateway address for host A in the 192.133.219.0 network?
192.135.250.1
192.31.7.1
192.133.219.0
**192.133.219.1
7 If the default gateway is configured incorrectly on the host, what is the impact
on communications?
The host is unable to communicate on the local network.
**The host can communicate with other hosts on the local network, but is
unable to communicate with hosts on remote networks.
The host can communicate with other hosts on remote networks, but is unable to
communicate with hosts on the local network.
There is no impact on communications.
8 What is the purpose of a default gateway?
physically connects a computer to a network
provides a permanent address to a computer
identifies the network to which a compu