Service Repair Manual
Models
330C L and 330C LN Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330C L EXCAVATOR CAP
Configuration: 330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine
Disassembly and Assembly
330C Excavator Machine Systems
Media Number -RENR5438-14
Publication Date -01/04/2010
Date Updated -13/04/2010
i02298121
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool
Part Number
Part Description
Qty
A
1P-2420
Transmission Repair Stand
1
B
138-7573
Link Bracket
2
C
1P-1863
Retaining Ring Pliers
1
D
138-7575
Link Bracket
3
E
208-6033
Spanner Socket As
1
F
138-7574
Link Bracket
2
G
5F-7366
Forcing Screw
1
1P-5546
Crossblock
1
1U-9889
Crossblock
1
1P-0520
Driver Group
1
6V-7888
Puller Leg
2
1H-3112
Puller Assembly
1
1P-5551
Adjustable Screw Assembly
1
H
138-7576
Link Bracket
3
J
1U-7600
Slide Hammer Puller Gp
1
1/13(W)
w
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
8T-0266
Bolt
1
Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1
g00892878
2. Use Tooling (H) and a suitable lifting device to position the final drive on Tooling (A). The
combined weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1) .
Illustration 2
g00892883
2/13(W)
w
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s