Service Repair Manual
Models
C18 Industrial Engine
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C18 INDUSTRIAL ENGINE WJB
Configuration: C18 Industrial Engine WJB00001-UP
Disassembly and Assembly
C18 Fire Pump Industrial Engine
Media Number -KENR8146-02
Publication Date -01/10/2014
Date Updated -17/10/2014
i07535626
Flywheel Housing - Remove and Install
SMCS - 1157-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
439-3939
Link Bracket
2
B
-
Block
12 by 12 by 24
1
Start By:
a. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear
Seal - Remove".
b. Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starter
Motor - Remove and Install".
c. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
d. Remove the engine speed sensor. Refer to Disassembly and Assembly, "Engine Speed
Sensor - Remove and Install".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6(W)
w
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat® products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1
g01238988
1. Use Tooling (B) or a suitable block to support the rear of the cylinder block in order to
remove flywheel housing (1). The weight of the engine is approximately 1814 kg (4000 lb).
2/6(W)
w
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe