Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
Acetone Chromatography Solvent
Acetone (67-64-1) 50%, and Water (7732-18-5) 50%.
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water and mild liquid soap for 15 minutes.
Internal: Give no more than 1-2 cups of water for dilution. Do not induce vomiting. Call a physician or poison control immediately.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: TWA 750 ppm, STEL 1000 ppm (OSHA, ACGIH)
Colorless, volatile liquid. Sweet odor.
Flammable liquid; serious fire hazard.
Irritating to body tissues. Avoid all body tissue contact. Mildly toxic by ingestion. Vapor causes
weakness, fatigue, nausea and headache. Skin contact causes dermatitis.
Section 5 — Fire Fighting Measures
Contains acetone: dangerous fire hazard from heat, flame or strong oxidizers. Flash point: 0 F (CC)
Flammable limits: lower 2.6%, upper 12.8%. Autoignition temperature: 869 F
Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE
and SCBA with full facepiece operated in positive pressure mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Remove all ignition sources and ventilate area. Contain spill with sand, and absorbent