Premier Lubricants (S) Pte Ltd
24 Jurong Port Road,
#01-01 Office Block,
CWT Distripark, Singapore 619097
Tel.: +65 262 5561
Fax: +65 262 5560
Castrol Ilocut 534
Castrol Ilocut 534 is a low viscosity, highly refined mineral oil containing
active sulphur, chlorine and other load-bearing extreme pressure additives so
as to prolong tool life, give good surface finish, reduce foaming and increased
The need for very high performance cutting oil is indicated by operating
conditions in which the boring head may be buried in the workpiece for very
long periods and be required to give continuous, accurate cutting with no
opportunity to check results while the cutting action is in progress.
As the cutting oil has to be fed through the bar itself, Castrol Ilocut 534 is
manufactured to a low viscosity so as to give rapid flushing action to clear
swarf from the boring head. It also gives reliable service on specialist machine
tools where oil delivery pressures can be boosted without any risk of foaming.
§ Consistently high surface finish and dimensional accuracy
§ Excellent product for deep hole drilling and boring operations.
§ Versatile product which can be used in many applications.
§ Exceptional anti-chip welding and flushing properties.
Castrol Ilocut 534 is a special cutting oil manufactured to meet the exacting
requirements found in deep hole boring, trepanning, drilling and gear cutting
operations. It can also be used for tapping, threading and other heavy
operations on automatic lathes.
Castrol Ilocut 534 contains elemental sulphur in the active form. It is
particularly suited to cut all steels including heat resisting and stainless. It is not
recommended for cuprous materials.
Density @ 15°C
Kinematic Viscosity, cSt
Closed Flash Point