Service Repair Manual
Models
390F and 390F L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 390F EXCAVATOR FEH
Configuration: 390F L Excavator FEH00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
390F Excavator Machine Systems
Media Number -UENR0165-05
Publication Date -01/01/2018
Date Updated -24/01/2018
i05680270
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
138-7575
Link Bracket
2
B
1P-0074
Slide Hammer Puller Gp
1
C
123-4370
Threaded Rod M20 - 2.5
2
D
1P-1864
Pliers
1
E
1P-1858
Pliers
1
F
1P-0520
Driver Group
1
G
8T-0349
Bolt
2
Start By:
a. Remove the travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/13
390F L Excavator FEH00001-UP (MACHINE) POWERED BY C18 Engine(M00727...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
1. Place an alignment mark across all housings of the travel motor for assembly purposes.
Illustration 1
g01282832
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are