General Information 0A-1
General Information
General Information
Table of Contents
General Information .............................................. 0A-2
Service Precautions ........................................... 0A-2
Reading the Model ............................................. 0A-7
General Information ........................................... 0A-8
Recommended Lubricant .................................0A-14
List of Trouble Symptom ..................................0A-15
Repair Standard ...............................................0A-24
0A-2 General Information
General Information
Service Precautions
In order to carry out work safely
1. Always use an engine stand when taking the
engine down from the vehicle.
Do not place the engine directly onto the ground,
or place in a manner that interferes with the oil
pan.
2. If you are working together with others, always pay
attention to each other's safety.
3. If you are repairing any part of the electrical sys-
tem, always remove the minus side cable from the
battery terminal before starting work. If you are
removing the battery cover, always remove the
cover in a place that is away from sources of fire/
heat.
4. Do not perform painting work or leave the engine
running for long periods of time in an enclosed or
badly ventilated indoor workshop.
5. Always use the correct specialized tool indicated in
the instructions. Using the incorrect tool may
cause damage to the parts or injury to the person
using the tool.
6. All regular tools, gauges and special tools should
be regularly inspected, and prepared before start-
ing work. Do not use bent spanners, hammers with
damaged edges, chipped chisels, or any other
faulty or damaged tools.
WSHK0190
General Information 0A-3
7. Always pay close attention to safety and handling
requirements when using grinders, cranes, weld-
ers, and other such equipment.
Moreover, always wear the correct protective gar-
ments and use the necessary safety tools for the
job in hand.
8. Always check that there are no fuel leaks when