STILLGmbH
R70-20 R70-25
Werk-
statt-
handbuch
Work-
shop
manual
Manuel
d´Atelier
Treibgas-Gabelstapler
LPG Fork Truck
Chariot élévateur au GPL
Diesel-Gabelstapler
Diesel Fork Truck
Chariot élévateur Diesel
R70-30 R70-35
R70-40 R70-45
TFG R7038-40
DFG R7032-R7034 R7048-R7050
Ident-Nr.164537 (en)
01
Workshop Manual 7032 - 34 / 38 - 40 / 48 - 50
Chassis Frame and Counterweight
01
STILL GmbH Stand: 2/1995 ( Ersatz für Stand: )
1
2 3
4
Chassis Frame
The chassis frame is constructed of electrically
welded steel plate.
Detachable fuel and hydraulic oil tanks are
mounted inside left-hand and right-hand frame
sections respectively for extra protection.
Counterweight
The removable rear counterweight is secured to the
frame weldment by 4 bolts.
1 = hex hd bolt M24x130, 8.8 DIN 933
Torque loading: 710 Nm
2 = lock ring
3 = spherical washer C 25 DIN 6319
4 = ball cup D 28 DIN 6319
Weight of the counterweight
7032/7038 = 1,170 kg
7033/7039 = 1,514 kg
7034/7040 = 1,915 kg
7048 = 1,985 kg
7049 = 2,395 kg
7050 = 2,715 kg
01
Workshop Manual 7032 - 34 / 38 - 40 / 48 - 50
Drivers cab
02
STILL GmbH Stand: 2/1995 ( Ersatz für Stand: )
Bolted to the frame at the front end and to the
counterweight at the rear, the cab is mounted at 4
points on rubber type anti-vibration mounts.
Removal
- Remove panel from front cowl
- Remove floor plate
- Remove upswept type exhaust pipe (if fitted)
- Remove cover plates left and right of inspec-
tion plate, giving access to the rear rubber
mounts (above counterweight)
- Disconnect the 3 connectors at the steering
column (Fig. 1, page 3)
- Disconnect the wiring harness from the steer-
ing column
- Remove the screws which secure steering
column to hand pump (steering wheel opera-
ted pump) - Fig. 1, page 3)
- Disconnect the connections on warning horn,
brake fluid reservoir and master cylinder,
located in the front cowl (Fig. 2, page 3)
1 = rubber type anti-vibration mount
2 = allen screw M10 x 80, 8.8
3 = washer
4 = hex nut; welded to the s