Technical Report ARAEW-TR-05007
ALTERNATIVE CARTRIDGE CASE MATERIAL AND DESIGN
Jerry S. Chung
Frontier Performance Polymers Corporation
26 Robert Street
Parsipanny, NJ 07054
ARMAMENT RESEARCH, DEVELOPMENT AND
Armaments Engineering and Technology Center (Benet)
Picatinny, New Jersey
Approved for public release; distribution is unlimited.
The views, opinions, and/or findings contained in this
report are those of the author(s) and should not be
construed as an official Department of the Army posi-
tion, policy, or decision, unless so designated by other
The citation in this report of the names of commercial
firms or commercially available products or services does
not constitute official endorsement by or approval of
the U.S. Government.
Destroy this report when no longer needed by any method
that will prevent disclosure of its contents or reconstruction
of the document. Do not return to the originator.
REPORT DOCUMENTATION PAGE
OMB No. 0704-01-0188
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources,
gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this
collection of information, including suggestions for reducing the burden to Department of Defense, Washington Headquarters Services Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be
subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
1. REPORT DATE (DD-MM-YYYY)
2. REPORT TYPE
3. DATES COVER