Hillyard Seal 341
Page 1
#341
MATERIAL SAFETY DATA SHEET
NFPA RATING: Health =
0 Flammability = 0 Reactivity = 0
HMIS RATING: Health =
0 Flammability = 0 Reactivity = 0
SECTION I -- IDENTITY AND MANUFACTURER'S INFORMATION (0617A)
Manufacturer's Name: HILLYARD INDUSTRIES
Product Name: SEAL 341
Address:
302 North Fourth Street
Date Prepared: June 7, 1994
St. Joseph, MO 64501
Prepared by: Regulatory Affairs Department
Emergency Telephone No.: (800)-424-9300 (Only in the event of chemical emergency involving a spill, leak, fire, exposure
or accident involving chemicals.)
Other information calls: (816) 233-1321 (Ext. 2303)
http://www.hillyard.com
SECTION II -- INGREDIENTS/IDENTITY INFORMATION
Components
ACGIH
OTHER LIMITS
(Specific Chemical Identity:
Common Name(s)
CAS#
OSHA PEL
TLV
RECOMMENDE
D
%
Zinc oxide(1)
1314-13-2
5 mg/M3
5 mg/M3
N/A
0.2-0.5
Water
7732-18-5
none
none
N/A
---
Acrylic copolymer
unknown to Hillyard
not est
not estab
N/A
---
Styrene acrylic emulsion
unknown to Hillyard
not estab
not estab
N/A
---
Tributoxyethyl phosphate*
78-51-3
not estab
not estab
N/A
1-2.5
Diethylene glycol monoethyl ether*
111-90-0
not estab
not estab
N/A
1-2
Diethylene glycol mono methyl ether*(2)
111-77-3
not estab
not estab
N/A
1-2
(1) Regulated by OSHA and the following states: FL., IL LA, MA, NJ.
(2) Regulated by the following states: FL., PA, RI.
*This product contains the following chemicals subject to the reporting requirements of SARA Title III, Section 313, and 40
CFR Part 372: Tributoxyethyl phosphate, Diethylene glycol monoethyl ether and Diethylene glycol mono methyl ether.
SECTION III -- PHYSICAL / CHEMICAL CHARACTERISTICS
Boiling Point:
(739 mm Hg.) 198.26°F
Specific Gravity (H20 = 1): 25°C =
1.04 & 39°C =
1.03
Vapor Pressure (mm Hg.):
21.1
Percent Volatile by Volume (%):
77.8
Vapor Density (AIR = 1):
1.1
Evaporation Rate (ethyl et