Service Repair Manual
Models
302.2D Mini Hydraulic Excavator
Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 302.2D MINI HYD EXCAVATOR LJG
Configuration: 302.2D Mini Hydraulic Excavator LJG00001-UP (MACHINE)
Disassembly and Assembly
301.7D, 302.2D and 302.4D Mini Hydraulic Excavators
Media Number -UENR3253-01
Publication Date -01/05/2015
Date Updated -12/05/2015
i05212950
Flywheel - Remove and Install
SMCS - 1156-010
Removal Procedure
Start By:
A. Remove the pump drive coupling.
Illustration 1
g03335836
1. Remove bolts (1). Remove flywheel (2).
Installation Procedure
1. Install flywheel (2) in the reverse order of removal.
2. Tighten bolts (1) to a torque of 84 N·m (62 lb ft)
1/2
302.2D Mini Hydraulic Excavator LJG00001-UP (MACHINE)(SEBP6414 - 17) - Doc...
2020/3/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 302.2D MINI HYD EXCAVATOR LJG
Configuration: 302.2D Mini Hydraulic Excavator LJG00001-UP (MACHINE)
Disassembly and Assembly
301.7D, 302.2D and 302.4D Mini Hydraulic Excavators Machine Systems
Media Number -UENR3254-01
Publication Date -01/05/2015
Date Updated -12/05/2015
i05228978
System Pressure - Release
SMCS - 4350-553-PX; 5050-553-PX; 6700-553-PX
Release Procedure (Hydraulic System Pressure)
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
1. Lower the work tools to the ground.
2. Turn the engine start switch to the OFF position.
3. Turn the key to the ON position without starting the machine.
4. Move the joysticks through