CECW-ET 10 January 2003
Errata Sheet
No. 1
Engineering and Design
Liquid Process Piping
EM 1110-1-4008
5 May 1999
Reference to MSS SP-119 on page A-6, paragraph A-1 is in error. The title of the
document is incorrect. Page A-6, paragraph A-1: The title for MSS SP -119 should be as
follows: Belled End Socket Welding Fittings, Stainless Steel and Copper -Nickel.
CEMP-RA
Engineer Manual
1110-1-4008
Department of the Army
U.S. Army Corps of Engineers
Washington, DC 20314-1000
EM 1110-1-4008
5 May 1999
Engineer and Design
LIQUID PROCESS PIPING
Distribution Restriction Statement
Approved for public release; distribution is
unlimited.
EM 1110-1-4008
5 May 1999
US Army Corps
of Engineers
ENGINEERING AND DESIGN
Liquid Process Piping
ENGINEER MANUAL
AVAILABILITY
Electronic copies of this and other U.S. Army Corp of Engineers publications are available on the Internet at
http://www.usace.army.mil/inet/usace-docs/. This site is the only repository for all official USACE engineer regulations,
circulars, manuals, and other documents originating from HQUSACE. Publications are provided in portable document
format (PDF).
CEMP-RA
DEPARTMENT OF THE ARMY
U.S. Army Corps of Engineers
Washington, DC 20314-1000
EM 1110-l-4008
Manual
No. 1110-l-4008
5 May 1999
Engineering and Design
LIQUID PROCESS PIPING
1. The purpose of this manual is to provide information for the design of liquid process
piping.
2. Applicability. This manual applies to all HQUSACE elements and all USACE Commands
having responsibility for the design of unit processes for treatment of liquids.
3. Distribution Restriction. Approved for public release; distribution is unlimited.
4. References. References are provided in Appendix A.
5. Scope. This manual is to be used in the selection of piping systems and materials for chemical
and physical unit processes. Process piping systems include pipe and a