INTRODUCTION
29002 604132500-1
Edition: 01/2003
Français - Printed in Italy
Printed by Studio ti
Print n. 604.13.250.00
WORKSHOP MANUAL
ENGLISH
INDEX
29002 604132500-5
INDEX
SPECIFICATIONS
Section 1 - Preliminary remarks
Section 2 - Specifications
Section 3 - Attachment dimensions
MAINTENANCE
Section 11 - Tools
Section 12 - Standard maintenance time table
Section 13 - Maintenance standards and test procedures
SYSTEM
Section 22 - Hydraulic system
Section 23 - Electrical system
Section 24 - Components system
DISASSEMBLING
Section 31 - Whole disassembling and assembling
Section 32 - Attachments
Section 33 - Upper slewing structure
Section 34 - Travel system
TROUBLESHOOTING
Section 42 - Hydraulic system
Section 43 - Electrical system
Section 44 - Engine
ENGINE
Section 51 - Engine
SAFETY PRECAUTIONS
29002 604132500-6
1.1 GENERAL SAFETY INFORMATION
1. Most accidents, which occur during operation,
are due to neglect of precautionary measures
and safety rules. Sufficient care should be taken
to avoid these accidents. Erroneous operation,
lubrication or maintenance services are very
dangerous and may cause injury or death of
personnel. Therefore all precautionary measures,
NOTES, DANGERS, WARNINGS and
CAUTIONS contained in the manual and on the
machine should be read and understood by all
personnel before starting any work with or on the
machine.
2. Operation, inspection, and maintenance should
be carefully carried out, and safety must be given
the first priority. Messages of safety are indicated
with marks. The safety information contained in
the manual is intended only to supplement safety
codes, insurance requirements, local laws, rules
and regulations.
3. Messages of safety appear in the manual and on
the machine : All messages of safety are identified
by the words "DANGER", "WARNING" and
"CAUTION".
DANGER
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if
not avoided, could result