As secondary source of heat transfer, heat sinks are primarily used. Heat generated by various equipments is first transferred to heat sink via conduction, after that heat is transferred to the environment. Heat sinks are thus used to maintain temperature of equipments under desirable range. CFD has recently emerged as an effective tool to judge performance of any equipment in design phase. CFD can also be used for design optimisation of heat sink also. In the present work, CFD analysis of heat sink has been carried out to find out the effect of change in air velocity. Effect of different materials used for the construction of heat sink on heat transfer aluminium alloys that is AA 6063, AA 6061, AA 6060 and AA 1050 has been carried out. It has been found that material AA 1050 shows the maximum heat transfer as compared to other materials. The work has also been carried out for various thicknesses of base metals. It has been found that heat sink having 10 mm base thickness has maximum heat transfer. Yogesh Kumar | N. V. Saxena "Optimization of Heat Transfer Process Parameters for Heat Sink using CFD" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33338.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/33338/optimization-of-heat-transfer-process-parameters-for-heat-sink-using-cfd/yogesh-kumar
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 4 Issue 6, September-October 2020 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD33338 | Volume – 4 | Issue – 6 | September-October 2020
Page 184
Optimization of Heat Transfer Process
Parameters for Heat Sink using CFD
Yogesh Kumar1, N. V. Saxena2
1Research Scholar, 2Assistant Professor,
1,2Department of Mechanical Engineering, Millennium Institute of Technology, Bhopal, Madhya Pradesh, India
ABSTRACT
As secondary source of heat transfer, heat sinks are primarily used. Heat
generated by various equipments is first transferred to heat sink via
conduction, after that heat is transferred to the environment. Heat sinks are
thus used to maintain temperature of equipments under desirable range. CFD
has recently emerged as an effective tool to judge performance of any
equipment in design phase. CFD can also be used for design optimisation of
heat sink also. In the present work, CFD analysis of heat sink has been carried
out to find out the effect of change in air velocity. Effect of different materials
used for the construction of heat sink on heat transfer (aluminium alloys that
is AA-6063, AA-6061, AA-6060 and AA-1050) has been carried out. It has been
found that material AA-1050 shows the maximum heat transfer as compared
to other materials. The work has also been carried out for various thicknesses
of base metals. It has been found that heat sink having 10 mm base thickness
has maximum heat transfer.
KEYWORDS: Heat sink, Velocity, Heat transfer, Computational fluid dynamics,
Base thickness
How to cite this paper: Yogesh Kumar | N.
V. Saxena "Optimization of Heat Transfer
Process Parameters for Heat Sink using
CFD" Published in
International Journal
of Trend in Scientific
Research
and
Development
(ijtsrd), ISSN: 2456-
6470, Volume-4 |
Issue-6,
October
2020,
pp.184-187,
URL:
www.ijtsrd.com/papers/i