Ridge Tool Company
400 Clark St., Elyria Ohio 44035-6001 U.S.A.
Catalog Sheet No. R-03-C
Effective Date: January 25, 2001
Visit us on the Internet: www.ridgid.com
The new Model 535A makes the threading operation more
productive. A large chip tray and oil reservoir makes the new
535A ideal for longer uninterrupted threading. The 535’s a
high clearance carriage makes the threading operation
easier and its generous top cover area is ideal for keeping
tools and work related materials handy. The new 535A is
designed around maximum uptime with the upgrades that
matter most to the pipe working professional.
Model 535A Automatic
Model No. 535A Automatic Threading Machine
with foot switch
1 - No. 811-A universal quick opening die head
(or models 816/817 die heads)
1 - No. 341 reamer
1 - No. 820 cutter
1 set 1/2″ - 3/4″ universal high speed dies
1 set 1″ - 2″ universal high speed dies
1 gallon stainless steel premium oil
2 hex wrenches
1 spare E-1032 cutter wheel
Pipe: 1/8″ - 2″ (3mm - 50mm)
21/4″ - 4″ (62mm - 100mm) with 141
Bolt: 5/16″ - 2″ (8mm - 50mm)
• Automatic Chuck
• 3-Speed (16/46/58 RPM) Transmission
• Large 1.75 Gallon Oil Reservoir
• 100% Greater Chip Tray Capacity
• Generous Top Cover Area For Keeping Tools and Fittings Handy
• High Clearance Carriage
• Can Be Used with Geared Threader Model 141
• Uses Model 816/817 Semi Automatic, Model 815A Self Opening or
Model 811A Quick Opening Die Heads
• CSA Approved
• Approved to UL Standards (NRTLC)
Printed in U.S.A. © RTC 9/03
All sales subject to Ridge Tool Company Terms and Conditions of Sales.
Motor: 2 HP, single-phase, 115V, 60 Hz, 20 Amp, Reversible Induction
Switches: FOR/OFF/REV and Integral safety foot switch
Chuck: Automatic with four reversible forged jaws.
Rear Centering Device: Automatic, centering only.
Cutters: Self-centering, full-floating. Two models available: 1) Standard.
No. 820 Wheel-Type Cutter, pipe capacity 1/8″ - 2