Epson WF 2830 Setup
Epson WF 2830 is a wireless printer that can print be accessed remotely from any
wireless-enabled device for printing. If you are setting up the Epson WF 2830 printer for
the first time, follow the steps mentioned below for Epson Wf 2830 setup.
First, unpack the printer and take out the supplies such as power cord, CD-ROM,
and ink cartridges.
Remove all the protective tapes and covers from the printer.
Connect the printer to an electrical outlet using the supplied power cord.
Raise the printer's control panel and press the Power button to power up the
Choose your language and configure the basic printer settings.
Install the ink cartridges after removing the yellow tapes from them.
Make sure to shake the cartridges before installing them into the printer.
Do not touch the ink cartridges' nozzle area because it may lead to poor print
Once the ink charging is completed, load a stack of legal plain paper into the
paper input tray.
Adjust them by sliding the paper edge guides to touch the edges of the loaded
Make sure to use only the printer-supported paper.
To use the fax function, connect the telephone line cord to the printer and
configure the fax settings.
Install the printer software on your computer using the software installation disc.
Finally, verify the printer functionality by printing a test page remotely from the