The water coming out from the nozzle is called as a jet and when the impacted on the different surfaces and the change in momentum can be determined and the experiment is performed with the nozzle, different type of plates such as flat, Circular and semi circular and a spring scale connected to the balanced beam and different weights are used as counter weights, flow meter and pipes. In this paper during the experimentation of determining the coefficient of impact on the vanes plates some of the minor Losses occurred due to the presence of bend in the suction pipe and nozzle pipe line connectivity and the extra fitting such as valve to control the flow on the pipe are present, due to this the flow of water, velocity in the pipe are varied, an attempt is done with this experiment to determine some important minor losses ,major losses are neglected as length of pipe is short. The readings from the experiment on three different plates are conducted and readings are tabulated and compared. J Narendra Kumar | G Narasimhulu "Experimental Investigation on Impact of Jet on Vanes Pipe System to Determine the Minor Losses" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33507.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/33507/experimental-investigation-on-impact-of-jet-on-vanes-pipe-system-to-determine-the-minor-losses/j-narendra-kumar
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 4 Issue 6, September-October 2020
@ IJTSRD | Unique Paper ID – IJTSRD33507
Experimental Investigation
Vanes Pipe System
J Narendra Kumar,
Assistant Professor
JB Institute of Engineering
ABSTRACT
The water coming out from the nozzle is called as a jet and when the
impacted on the different surfaces and the change in momentum can be
determined and the experiment is performed with the nozzle,
of plates such as flat, Circular and semi circular and a spring scale
connected to the balanced beam and different weights are used as counter
weights, flow meter and pipes. In this paper during the experimentation of
determining the coefficient of impact on the vanes(plates) some of the
minor Losses occurred due to the presence of
nozzle pipe line connectivity and the extra fitting such as valve to control
the flow on the pipe are present, due to this the flow of water, velocit
the pipe are varied, an attempt is done with this experiment to determine
some important minor losses ,major losses are neglected as length of pipe
is short. The readings from the experiment on three different plates are
conducted and readings are tabulated and compared.
KEYWORDS: Jet, Flat Plate, Momentum, Minor Losses, Bend, Major losses,
Velocity
INTRODUCTION
Moving fluids, in natural or artificial systems, may exert
different forces on objects in contact with it. To
the fluid motion, for a finite region of the fluid is
selected, and the gross effects of the flow, such as its force
on an object, is determined by calculating the net mass rate
that flows into and out of the control volume. These forces
can be determined, as in solid mechanics, by the use of
momentum equation. The force exerted by a jet of fluid on
a flat or curve surface can be resolved by applying the
momentum equation. The study of these forces is essential
to the study of fluid mechanics and hydraulic machinery.
When the water comi