DISASSEMBLY AND ASSEMBLY
STARTING MOTOR
REMOVAL OF STARTING
MOTOR ASSEMBLY
PC27MRX, PC30MRX
a
Stop the machine on the horizontal ground, then
lower the work equipment
completely
to the
a
ground and stop the engine.
Disconnect
the cable from the negative
(-) ter-
minal of the battery.
Remove seat bracket and right and left PPC valve
assembly.
For details, see REMOVAL OF SEAT
BRACKET, R.H. AND L.H. PPC VALVE ASSEMBLY.
Disconnect wiring connector
(1) (T4).
Remove the boots, then disconnect 2 wires (2).
Remove starting motor assembly
(3).
INSTALLATION OF STARTING
MOTOR ASSEMBLY
PC27MRX, PC30MRX
l Carry out installation
in the reverse order to re-
moval.
-T-----.\
lvGiph&--
CWPO6279
30-10
0
PC27 - 45MRX-1
DISASSEMBLY AND ASSEMBLY
STARTING MOTOR
REMOVAL OF STARTING
MOTOR ASSEMBLY
PC35MRX, PC40MRX, PC45MRX
A
.
Disconnect
the cable from the negative
(-) ter-
minal of the battery.
1. Remove air-conditioner
unit assembly.
Ir
For operator cabin specification machine only.
2. Remove inspection cover (1) at under of operator’s
seat.
3. Disconnect wiring connector
(2).
Ir Wiring connector
(T4) : PC35MRX
J, Wiring connector (MIO) : PC40MRX, PC45MRX
4. Remove the boots and disconnect 2 wire (3).
5. Remove starting motor assembly
(4).
INSTALLATION OF STARTING
MOTOR ASSEMBLY
PC35MRX, PC40MRX, PC45MRX
l Carry out installation
in the reverse order to re-
moval.
PC27 - 45MRX- 1
30-l 1
0
DISASSEMBLY AND ASSEMBLY
ALTERNATOR
REMOVAL OF ALTERNATOR
ASSEMBLY
PC27MRX, PC30MRX
g
Stop the machine on the horizontal ground, then
lower the work equipment
completely
to the
A
ground and stop the engine.
Disconnect
the cable from the negative
(-1 ter-
minal of the battery.
1.
2.
3.
4.
5.
6.
Remove the cover (I 1.
Disconnect connector
(2) (El) and (3) (E2).
Disconnect water temperature
sensor connector
(4) (E7).
Remove adjustment bolt (5).
Loosen mounting bolt, and remove alternator belt
(7).
m
Remove mounting bolt (6) and remove the alter-
nator