Service Repair Manual
Models
C2.2 Industrial Engine
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C2.2 INDUSTRIAL ENGINE G7M
Configuration: C2.2 Industrial Engine G7M00001-UP
Disassembly and Assembly
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial
Engines and Engines for Caterpillar Built Machines
Media Number -RENR2424-09
Publication Date -01/04/2007
Date Updated -14/07/2017
i02235578
Crankshaft Pulley - Remove and Install
SMCS - 1205-010
Removal Procedure
Start By:
a. Remove the fan drive belt. Refer to Disassembly and Assembly, "V Belts Remove and
Install" for more information.
Table 1
Required Tools
Tool Part Number Description Qty
A
8S-2264
Puller Group
1
6V-3668
Bolt
3
1/4(W)
w
2020/6/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 1
g00827213
1. Remove the nut (5) and the washer (3) from the crankshaft pulley (2).
Illustration 2
g00827241
2. Install tool (A). Use tool (A) in order to remove the crankshaft pulley (2) from the
crankshaft (4).
2/4(W)
w
2020/6/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Remove the woodruff key (1) from the crankshaft (4).
Installation Procedure
Illustration 3
g00827213
Note: Inspect the following components for damage: the taper of the crankshaft, the
woodruff key and the bore of the crankshaft pulley. Replace any components that are
damaged. Ensure that the taper of the crankshaft and the bore of the crankshaft pulley are
clean and dry before assembly.
1. Install the woodruff key (1) to the crankshaft (4).
2. Install the crankshaft pulley (2) to the crankshaft (4).
3. Install the washer (3) to the crankshaft (4).
4. Lubricate the nut (5) with clean engine oil and install the nut.
For C0.5 and C0.7 engines, tighten the nut (5) to a torque of 93 N·m (69 lb ft).
For C1.1/3011C and C1.6 engines, tighten the nut (5) to a torque of 123 N·m (91 lb ft).
For C1.5/3013C, C2.2/3024C and C2.2/3024CT engines,