Loading ...
IJTSRD
Education
Volume 4 Issue 5
29
0
Try Now
Log In
Pricing
International Journal of Trend in Scientific Research and Development (IJTSRD) Volume 5 Issue 4, May-June 2021 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470 @ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1467 Development of Modified System for Round Ring Cloth Peg Assembly Anurag K. Nagpure1, Dr. Anil V. Vanalkar2 1Research Scholar, 2Professor 1,2Department of Mechanical, K.D.K College of Engineering, Nagpur, Maharashtra, India ABSTRACT Clothes pegs are mostly used for hanging a wet cloth for drying. In cloth pegs it consists there are two parts of plastic peg and assemble with round ring. There are separately manufacture of pegs and round ring. This is very tedious and troublesome process, So that research of machine, design and after that fabricated of mechanism for reduced the human effort. KEYWORDS: Plastic peg, CAM, Shaft, Nut & Bolts, Number of Links, Gajan pin, DC Motor, Bending Diagrams, mechanism. How to cite this paper: Anurag K. Nagpure | Dr. Anil V. Vanalkar "Development of Modified System for Round Ring Cloth Peg Assembly" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4, June 2021, pp.1467-1469, URL: www.ijtsrd.com/papers/ijtsrd43612.pdf Copyright © 2021 by author (s) and International Journal of Trend in Scientific Research and Development Journal. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) (http: //creativecommons.org/licenses/by/4.0) INTRODUCTION Cloth peg are mostly used for hanging a wet clothes for drying in line at overall world. It consist of two plastic peg and one metal round ring or also assembly in U-shaped pin ring is assembled together. They made from plastics, wood, steel etc. Clothe pegs often comes in many different designs and different colours. It is done by workers and machines. Fig-1: Round ring cloth pegs Need of the project For the inserting a two parts of the clothe peg is very easy. When to developing machine for inserting a ring into cloth peg for reduced an effort for making a job easily and more banalities and to safety of worker. Research Methodology Research methodology to be employed after visiting a plastic peg industry. I see assemble a parts of cloth peg is automated or semi-automated machine and the cost of the machine is very costly and in last year one engineering student can developed a design a mechanism but this a hand operated mechanism. The used of human effort is more and production rate is less. So my aim is to develop a small machine to reduce their manual efforts make their easy job. So Research and developing a mechanism. I Appropriate mechanism inserting a round ring into the cloth peg. CAD MODEL OF THE ASSEMBLY MACHINE Fig-4: CAD Model of Workstation-I IJTSRD43612 International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 @ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1468 Fig-4: CAD Model of Workstation-II Equipments with Dimensions Fig: Link-I Fig:- Link –II Fig:-LINK-III/ ARM Fig:- Flat Plate view of Machine Photo Figure Fig: Workstation-I Fig: Workstation-II Machine working process The machine consists of a two work station in work stations with arrangement of the motor (geared motor). Firstly we started the power supply after that to adjust the speed of gear motor and now starting the production of cloth peg. In workstation-I to start the motor now starting rotation of motor as well as cam the follower started the operation. The link-Ist link is linear motion and they converted into rotary motion and power transmitted to link-II at one end to other end and this link is power transmitted to Arm. After that Arm is starting the move and arrange on vertical plate and this the groove(Slot) is present the on the upper side of vertical plate and the dimension of groove(slot) is (25mm*1mm*4mm) and metal ring is temporary fitted in slot the mouth(Cut portion of ring) of ring is upper side. The arm is starting the move at the distance (22-25mm) after the ring is twisted and then the plastic cloth peg and rectangular groove is present in the peg and the peg is inserting the metal ring manually after twisted the metal then Ist working is finished. Now, this process is continuously in IInd workstation after the peg inserted into the rectangular groove . The vertical arrangement is is present in upper surface of machine and this vertical metal rod one rod is fixed and another is moveable the cloth peg is fitted into the two vertical bar and the another is starting the move then the metal ring mouth is expanded and then the peg is lightly push down then the ring is directly fitted into the peg then the IInd workstation is successfully finished and clothe peg is assemble is finished. Conclusion Cloth peg consists of two plastic parts and a metal ring. The plastic parts and the metal ring are manufactured separately and then assembled together. Assembling of the plastic parts and the ring is a tedious and troublesome process. So, the “Developed of modified system for Round Ring Cloth Peg Assembly Machine” is designed which will reduce the human efforts and increasing a production rate. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470 @ IJTSRD | Unique Paper ID – IJTSRD43641 | Volume – 5 | Issue – 4 | May-June 2021 Page 1469 ACKNOWLEDGEMENT I express my sincere gratitude to my guide Dr. A. V. Vanalkar (Professor), Mechanical Engineering Department, K.D.K. College of Engineering, Nagpur for their valuable guidance, proper advice and moral support during the course of my work on this paper. Reference [1] https://en.wikipedia.org/wiki/Clothespin. [2] VB Bhandari, “Design of Machine Elements”, Tata McGraw Hill Education Private Limited, New Delhi, India, Third Edition, 2012. [3] R.S. Khurmi, J.K. Gupta, “Theory of Machines”, S.Chand Publications, Eurasia Publishing House (Pvt.) Ltd., Ram Nagar, New delhi-110055, Fourteenth Revised Edition, 2007. [4] SS Rattan, “Theory of Machines”, McGraw Hill Education (India) Private Limited, New Delhi, India, Fourth Edition, 2016. [5] R.S. Khurmi, J.K. Gupta, A Textbook Of Machine Design(S.I. Units), S.Chand Publications, Eurasia Publishing House(Pvt.) Ltd., Ram Nagar, New Delhi- 110055,Fourteenth Edition, 2005. [6] J.S. Rao, R.V. Dukkipati, Mechanism and Machine Theory, Second Edition, New Age International (P) Limited, Publishers, 1998. [7] Er. R.K. Rajput, “Strength of Materials (SI Units), S.Chand & Company Ltd., Ram Nagar, New Delhi- 110005, Fifth Revised Edition, 2012. [8] A.M. Kuthe, “Computer Graphics Including CAD, AutoCAD And C”, S.Chand & Company Ltd., Ram Nagar, New Delhi-110055, First Edition, 2005. [9] Ibrahim Zeid, R Sivasubramanian, “CAD/CAM Theory and Practice”, Tata McGraw Hill Education Private Limited, New Delhi, India, Second Edition, 2010. [10] S.K. Hajra Choudhury, A.K. Hajra Choudhury, Nirjhar Roy, Elements of Workshop Technology, Vol: 1 Manufacturing Processes, Media Promoters & Publishers Pvt. Ltd., Mumbai-400007, 14th edition, 2010. [11] S.K. Hajra Choudhury, A.K. Hajra Choudhury, Nirjhar Roy, Elements of Workshop Technology, Vol: 2 Machine Tools, Media Promoters & Publishers Pvt. Ltd., Mumbai400007, Thirteenth edition, 2014
