MATERIAL SAFETY DATA SHEET
This MSDS complies with 29 CFR 1910.1200 (OSHA Hazard Communication Standard) and
Canadian WHMIS Regulations.
IMPORTANT: Read this MSDS before handling and disposing of this product.
Pass this information on to employees, customers and users of this product.
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identity: EIFS Tape
HMIS Hazard Ratings
Intended Use: Construction Waterproofing Material
Health
1*
Fire
1
Manufacturer:
Protecto Wrap Company
Reactivity
0
1955 South Cherokee Street
Denver, CO 80223
Telephone:
(303) 777-3001
Fax:
(303) 777-9273
Internet:
www.protectowrap.com
Emergency Phone: CHEMTREC: (800) 424-9300
MSDS Date of Preparation: 10/17/03
Prepared by: Denese A. Deeds, CIH Industrial Health & Safety Consultants, Inc. Woodbridge, CT 203-929-3473
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Component
CAS No.
Amount
Exposure Limit
Asphalt (petroleum; bitumen)
8052-42-4
60-80%
0.5 mg/m3 TLV-TWA
Calcium Carbonate
1317-65-3
10-20%
5 mg/m3 PEL-TWA
(respirable fraction)
10 mg/m3 TLV-TWA
Non-Hazardous Components >1%: Resins and Polymers 10-20%
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
This product is a solid black tape with a white/tan wrapping and no odor. Product is not flammable but
will burn under fire conditions. May cause mild eye and skin irritation.
4. FIRST AID MEASURES
EYE: First check victim for contact lenses and remove if present. Flush victim's eyes with large
quantities of water, holding the eyelids apart. Get medical attention if irritation persists.
SKIN: Remove contaminated clothing. Wash skin thoroughly with soap and water. If rash or irritation
develop, get medical attention.
INGESTION: If conscious, rinse mouth with water. Never give anything by mouth to an unconscious
or convulsing person. Get medical attention.
INHALATION: If symptoms of exposure dev