Prosthetic feet are designed for an individuals foot at a particular activity level. Prosthetic foot is a style for people that cannot walk, the performance is basically cosmetic. For people who square measure most actively, a prosthetic foot should mimic a traditional foot throughout the act of walking. The fabric for prosthetic feet varies by varied use of foot and by varied application. Wood, plastic and foam are sometimes found in feet designed for people who have low activity levels and need stability. Carbon fiber feet meet the purposeful wants for shock absorption and energy potency, and square measure light weight further. a variety of metals square measure used for prosthetic limbs Al, Titanium, Magnesium, Copper, Steel, and lots of additional. titanium was discovered within the late eighteenth century. Its a typical metal used for medical and engineering applications due to its several favorable properties. its sensible strength to weight quantitative relation, guck strength to density quantitative relation, glorious corrosion resistance, density and its light weight. So, perform static and model analysis on existing prosthetic foot to seek out stresses, total deformation. Then replace the fabric with the 3D printing additive producing technique. And find out the analysis result and compare the prevailing. Then experimental testing may be carried out to validate the result. Mr. Akshay Dashrath Mule | Prof. Dr. P. M. Bagade "Design and Analysis of Prosthetic Foot using Additive Manufacturing Technique" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45044.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/45044/design-and-analysis-of-prosthetic-foot-using-additive-manufacturing-technique/mr-akshay-dashrath-mule
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 5 Issue 5, July-August 2021 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD45044 | Volume – 5 | Issue – 5 | Jul-Aug 2021
Page 1262
Design and Analysis of Prosthetic Foot using
Additive Manufacturing Technique
Mr. Akshay Dashrath Mule, Prof. Dr. P. M. Bagade
Padmabhooshan Vasantraodada Patil Institute of Technology, Bavdhan, Pune, Maharashtra, India
ABSTRACT
Prosthetic feet are designed for an individual's foot at a particular
activity level. Prosthetic foot is a style for people that cannot walk,
the performance is basically cosmetic. For people who square
measure most actively, a prosthetic foot should mimic a traditional
foot throughout the act of walking. The fabric for prosthetic feet
varies by varied use of foot and by varied application. Wood, plastic
and foam are sometimes found in feet designed for people who have
low activity levels and need stability. Carbon fiber feet meet the
purposeful wants for shock absorption and energy potency, and
square measure light-weight further. a variety of metals square
measure used for prosthetic limbs; Al, Titanium, Magnesium,
Copper, Steel, and lots of additional. titanium was discovered within
the late eighteenth century. It's a typical metal used for medical and
engineering applications due to its several favorable properties. it's
sensible strength to weight quantitative relation, guck strength to
density quantitative relation, glorious corrosion resistance, density
and it's light-weight. So, perform static and model analysis on
existing prosthetic foot to seek out stresses, total deformation. Then
replace the fabric with the 3D printing additive producing technique.
And find out the analysis result and compare the prevailing. Then
experimental testing may be carried out to validate the result.
KEYWORDS: Design optimization, Prosthetic feet, 3 Point bending
test, UTM
How to cite this paper: Mr.